Flexible thin film solar cells that can be produced by roll-to-roll
manufacturing are a highly promising route to cheap solar electricity.
Now scientists from Empa, the Swiss Federal Laboratories for Materials
Science and Technology, have made significant progress in paving the way
for the industrialization of flexible, light-weight and low-cost
cadmium telluride (CdTe) solar cells on metal foils. They succeeded in
increasing their efficiency from below eight to 11.5 percent by doping
the cells with copper, as they report in the current issue of Nature
Communications.
In order to make solar energy widely affordable
scientists and engineers all over the world are looking for low-cost
production technologies. Flexible thin film solar cells have a huge
potential in this regard because they require only a minimum amount of
materials and can be manufactured in large quantities by roll-to-roll
processing. One such technology relies on CdTe to convert sunlight into
electricity. With a current market share that is second only to
silicon-based solar cells CdTe cells already today are cheapest in terms
of production costs.It is also known as led dimmable driver,
LED daytime running lamps. Grown mainly on rigid glass plates, these
so-called superstrate cells have, however, one drawback: they require a
transparent supporting material that lets sunlight pass through to reach
the light-harvesting CdTe layer, thus limiting the choice of carriers
to transparent materials.
The inversion of the solar cell’s
multi-layer structure – the so-called substrate configuration – would
allow further cost-cuttings by using flexible foils made of, say, metal
as supporting material. Sunlight now enters the cell from the other
side, without having to pass through the supporting substrate. The
problem, though, is that CdTe cells in substrate configuration on metal
foil thus far exhibited infamously low efficiencies well below eight
percent – a modest comparison to the recently reported record efficiency
of 19.6 percent for a lab-scale superstrate CdTe cell on glass.
(Commercially available CdTe superstrate modules reach efficiencies of
between 11 and 12 percent.)
Copper doping for solar cells
One
way to increase the low energy conversion efficiency of substrate CdTe
cells is p-type doping of the semiconductor layer with minute amounts of
metals such as copper (Cu). This would lead to an increase in the
density of “holes” (positive charge carriers) as well as their
lifetimes, and thus result in a high photovoltaic power, the amount of
sunlight that is turned into electrical energy. A perfect idea – if CdTe
weren’t so notoriously hard to dope. “People have tried to dope CdTe
cells in substrate configuration before but failed time and again,”
explains Ayodhya Nath Tiwari, head of Empa’s laboratory for Thin Films
and Photovoltaics.
His team decided to try nonetheless using
high-vacuum Cu evaporation onto the CdTe layer with a subsequent heat
treatment to allow the Cu atoms to penetrate into the CdTe. They soon
realized that the amount of Cu had to be painstakingly controlled: if
they used too little, the efficiency wouldn’t improve much; the very
same happened if they “over-doped.An emergency light is a battery-backed lighting device that comes on automatically when a building experiences a power outage.”
The
electronic properties improved significantly, however, when Lukas
Kranz, a PhD student in Tiwari’s lab, together with Christina Gretener
and Julian Perrenoud fine-tuned the amount of Cu evaporation so that a
mono-atomic layer of Cu would be deposited on the CdTe. “Efficiencies
increased dramatically, from just under one percent to above 12,” says
Kranz. Their best value was 13.6 percent for a CdTe cell grown on glass;
on metal foils Tiwari’s team reached efficiencies up to 11.5 percent.
Increasingly ambitious targets: hitting the 20 percent ceiling
For now, the highest efficiencies of flexible CdTe solar cells on metal foil are still somewhat lower than those of flexible solar cells
in superstrate configuration on a special (and expensive) transparent
polyimide foil, developed by Tiwari’s team in 2011. But, says co-author
Stephan Buecheler, a group leader in the lab, “Our results indicate that
the substrate configuration technology has a great potential for
improving the efficiency even further in the future.” Their short-term
goal is to reach 15 percent. “But I’m convinced that the material has
the potential for efficiencies exceeding 20 percent.” The next steps
will focus on decreasing the thickness of the so-called window layer
above the CdTe, including the electrical front contact. This would
reduce light absorption and, therefore, allow more sunlight to be
harvested by the CdTe layer. “Cutting the optical losses,A solar bulb that charges up during the day and lights the night when the sun sets.” is how Tiwari puts it.Please visit his website at www.hmhid.com.
2013年8月15日 星期四
2013年6月27日 星期四
L.E.D. There Be Light
In 2007, the Federal government passed a law mandating a gradual transition to more energy-efficient light bulbs. Manufacturers have already phased out 75 and 100-watt bulbs. And next January will be lights out for the old 40 and 60-watt energy hogs.
Turns out the light bulb Thomas Edison invented over 130 years ago is incredibly inefficient. It’s internal filament wire is basically a heat source that gives off light. Not bad for the 1880s, but considering 17% of the country’s total electricity consumption now goes to lighting our homes and businesses, we have an opportunity to reduce our energy footprint by relying on newer, more efficient options.
While CFLs – those swirly looking, Compact Fluorescent Lights – are certainly more energy-efficient than incandescents, disposing them has always been an issue. CFLs contain mercury, a toxic metal, and must be properly recycled when they burn out. And if they fall and break in your home, well, the EPA has a long list of cleanup precautions, including turning off your central air so the toxins don’t spread.
The real bright spot in the lighting aisle comes from LED bulbs.
These days LEDs can be found everywhere – flashlights, cell phones, street lamps - except the light fixtures in our homes. Why? Because up until now they were simply too expensive for most consumers. But that’s about to change.
This year Durham, North Carolina-based Cree introduced a $10, 40-watt replacement LED light bulb and a 60-watt replacement model that sells for $13. Both bulbs look and feel like incandescent bulbs, only better.
Before you write off the LEDs because of the steep price tag, consider this: their 60-watt replacement bulb is designed to last for over 22 years. That’s years. This translates into an estimated annual energy cost of $1.14. By comparison, a standard 60-watt incandescent bulb will burn out in about 11 months and add $7 to your annual energy bill. Consumer Reports crunched the numbers and says you will make your money back with Cree’s 60-watt replacement bulb in under two years; “After that you would save $149 in energy and bulbs over its life when compared with an incandescent.” How many light bulbs do you have in your home? You do the math.
But what about the light quality, you ask? For a long time the knock against CFLs and LEDs was that they simply can’t compete with the warm, bright glow from incandescents. We conducted a little field test to see how the bulbs compare:
Could you see a difference? From my perspective the light quality was pretty much the same. And I suppose that’s the point.
Bottom line: switching to LED bulbs is a no-brainer if you’re looking to reduce your energy consumption and your utility bill. Most reviewers highlight Cree’s bulbs for its price and light quality. But there are other options on the market, that span the price and light range so shop around and choose an LED bulb that works best for you. Click on their website hmhid for more information.
Turns out the light bulb Thomas Edison invented over 130 years ago is incredibly inefficient. It’s internal filament wire is basically a heat source that gives off light. Not bad for the 1880s, but considering 17% of the country’s total electricity consumption now goes to lighting our homes and businesses, we have an opportunity to reduce our energy footprint by relying on newer, more efficient options.
While CFLs – those swirly looking, Compact Fluorescent Lights – are certainly more energy-efficient than incandescents, disposing them has always been an issue. CFLs contain mercury, a toxic metal, and must be properly recycled when they burn out. And if they fall and break in your home, well, the EPA has a long list of cleanup precautions, including turning off your central air so the toxins don’t spread.
The real bright spot in the lighting aisle comes from LED bulbs.
These days LEDs can be found everywhere – flashlights, cell phones, street lamps - except the light fixtures in our homes. Why? Because up until now they were simply too expensive for most consumers. But that’s about to change.
This year Durham, North Carolina-based Cree introduced a $10, 40-watt replacement LED light bulb and a 60-watt replacement model that sells for $13. Both bulbs look and feel like incandescent bulbs, only better.
Before you write off the LEDs because of the steep price tag, consider this: their 60-watt replacement bulb is designed to last for over 22 years. That’s years. This translates into an estimated annual energy cost of $1.14. By comparison, a standard 60-watt incandescent bulb will burn out in about 11 months and add $7 to your annual energy bill. Consumer Reports crunched the numbers and says you will make your money back with Cree’s 60-watt replacement bulb in under two years; “After that you would save $149 in energy and bulbs over its life when compared with an incandescent.” How many light bulbs do you have in your home? You do the math.
But what about the light quality, you ask? For a long time the knock against CFLs and LEDs was that they simply can’t compete with the warm, bright glow from incandescents. We conducted a little field test to see how the bulbs compare:
Could you see a difference? From my perspective the light quality was pretty much the same. And I suppose that’s the point.
Bottom line: switching to LED bulbs is a no-brainer if you’re looking to reduce your energy consumption and your utility bill. Most reviewers highlight Cree’s bulbs for its price and light quality. But there are other options on the market, that span the price and light range so shop around and choose an LED bulb that works best for you. Click on their website hmhid for more information.
訂閱:
文章 (Atom)